Current Lead Times: 1-4 Weeks on Most Long Block Engines; 5 Days on Heads – *call us for more exact lead times for your specific build 
Search

6.0L 2005-2007 Powerstroke Long Block Daily Driver Ford Diesel Crate Engine 20mm Heads Choate Performance

SKU: CEP60LD20MM
UPC : 659657237392

$9,800.00$11,300.00

CHOATE 6.0L Long Block Daily Driver Engine 6.0L Long Block Daily Driver Engine 2003-2007 Powerstroke Ford Diesel Engine 20mm Heads Manufacturer: CHOATE Engineering Performance. CHOATE Part Number: CEP60LD. Fitment: Fits 2003-2007 Ford 6.0L Powerstroke Equipped Vehicles

This 6.0L Powerstroke Long Block Build Includes:

  • Our Built-In-House 6.0L Powerstroke Heads
  • These Heads are Magnafluxed and Pressure Tested. Includes Ground Valves, New Induction Hardened Seats, All New Valve Guides, New Valve Seals, New Freeze Plugs, and New Injector Cups. WE We also Test Spring Tension.
  • Head Studs and New Head Gaskets are included in our 6.0L Powerstroke Daily Driver Engine
  • We at CHOATE use high strength head studs with a 230K LB tensile strength to increase clamping load of the head paired with an aftermarket gasket that uses a larger fourth layer and cleat to bind the multi-layer steel gasket
  • Full CNC blue print machining on the 6.0L Engine, (bore, deck, hone and line honed)
  • The Cylinder bores are blue print bored to a true 90 degrees from the crankshaft center line, prior to being diamond honed to within .0002 Inch for precise piston to cylinder bore clearances. We main bore and line hone the crankshaft which is honed to precisely align the crankshaft in the engine block. We bore the block back to the crankshaft center line and hone the block to RA13 finish.
  • The piston diameter measured to the nearest .0001 Inch matched to cylinder bores. The Cylinder block is surfaced to a finish of RA30 or lower, which meets the factory specification in both flatness and smoothness for the block to head sealing surface. This is mandatory for proper sealing of a MLS Gasket.
  • Connecting Rods, New Damper and Flexplate for Automatic Transmission.
  • Check both wrist pin and crank pin to rod clearances
  • All Manual Transmission Engines will incur additional charges and will be balanced to a stock flywheel. Or if you are using an your Aftermarket flywheel please send in to Choate
  • New Upgraded Pistons .10 – .30 over New Pistons, Rings, Pin Retainers weight matched prior to crank balancing
  • New OE Lifters, Lifter Guides, OE Crank Flange Bolts, updated 9.800 OE Pushrods
  • Crankshaft
  • Balanced with the Rotational Assembly. Checked for run-out inspected for fatigue. Crankshaft is polished and ground to .0005 concentricity or less.
  • Camshaft
  • Polished and Inspected
  • New Rod, Main and Cam Bearings
  • New Pushrods
  • Install Rear Main Seal
  • Install New Bed Seals
  • Install New Rear Cover Gasket
  • Install Upper and Lower Oil Pan Gaskets
  • Install Pickup Tube O-Ring
  • Rear Cover Installed

CHOATE Engineering Performance Crate Engine Features :

500 HP rated.
This CHOATE engine is fully balanced, and is the perfect engine for spirited daily driving, consumer level towing and everyday life.
Upgrades over the Model C include but are not limited to:

  • Torque Plate Honing
  • Full Engine Balancing
  • Harmonic Balancer
  • Head Studs
  • Valve Seats
  • Rear Cover and Pickup Tube
  • Oil Pans
  • Welded Crank Gear

Common Issues With The Ford Powerstroke 6.0L Block and Heads (and how we fix them)

Head Gaskets – We at CHOATE Engineering use high strength head studs with a 230K LB tensile strength to increase clamping load of the head paired with an aftermarket gasket that uses a larger fourth layer and cleat to bind the multi-layer steel gasket.
Excess sand from casting process – Excess sand from the manufacturing process helped clog the oil cooler creating bearing issues, fuel system issues as well as VGT turbo and EGR issues.

By use of our extensive cleaning methods thru media blasting, furnaces, spray cabinets, hot tanks, and ultrasonic equipment, we at CHOATE Performance do this to protect your investment.
Head Cracks – The 6.0L Power Stroke cylinder heads from Ford are known to crack around the injector cup, leaking fuel into the coolant system.

Our heads feature much thicker castings in this problematic area.

Optional Parts are not installed. Optional parts are covered under the manufacturer’s warranty and not by CHOATE.

Looking for a Product or Service?

Get A Quote

Contact Information

*Please choose the year first
*If you know your vin number before hand it is very helpful during the quotation period. Please note that this will be required before the engine is built.

Contact Information