Description

KC300x 63/70 Turbo

Gen 2

Recommended injectors: 180cc-30%/Stock

Minimum injectors: Stock

Maximum injectors: 180cc/30%

Features & Details:

• 100% drop in turbo
• 4″ ported housing with anti-surge for high flow
• 63mm 7×7 sxe style compressor wheel with extended tip technology
• 70mm SXE style turbine wheel
• High Flow deleted EBPV outlet flange
• Reliable Journal Bearing Design (Rebuildable)
• Comes with all gaskets and orings to install
• Comes with new 4″ intake boot

Description:

This is a journal bearing turbo with a Borg Warner 300sxe Style turbine wheel, modified to fit inside a drop in ready Powerstroke turbo.

This turbo will surprise you at how well it runs! KC Turbos has torture tested it for longevity, proven its capability on the dyno and at the Race Track. The 1.0 A/R Housing is intended to cool your egts above 3000 RPMS, for dedicated tow rigs and daily drivers the .84 A/R housing will provide a quicker spool and cooled EGT’s below 3000 RPMs.

**KC Turbos Highly Recommends adding these products for best results:**

1. Upgrading you up-pipes
2. Upgrading EBPV Pedestal
3. Running a Hydra Programming Chip

**EXHAUST BRAKES:  KC Turbos gets asked a lot about exhaust brakes and if they work with our turbos.  KC Turbos has found that some brands have clearance issues and might cause the brake to hinder performance, rub the turbine wheel, or cause other issues.  These brakes typically use some sort of flapper to close which causes extreme exhaust back pressure to aide in braking.  This can be hard on a turbo and motor and is not recommended.  It will be up to the customer to verify fitment and functionality.**

**Picture is of a polished cover, these typically come sand cast unless specifically requested.  You may get a polished unit depending on stock.  Updated pics coming soon.  You can add a polished cover for an additional $250**

**Two week lead time on all polished covers**

**KC turbos are designed to fit directly in 7.3 equipped pick-up trucks. Although KC turbos can drop into 7.3 equipped Vans, you will need to modify the turbo intake boot and down-pipe for proper fitment*

7.3L POWERSTROKE ENGINES

Fits 1994, 1995, 1996, 1997, 1998 Ford Power Stroke Equipped Vehicles 

This item comes with a manufacturer’s warranty.

To keep up to date on CHOATE please follow our social pages. Facebook, Youtube, and Instagram