7.3L 1994-2003 Powerstroke Full Running Daily Driver Ford Diesel Crate Engine

This 7.3L Powerstroke Full Running Daily Driver Diesel Engine Build Includes:

• Balanced and Matched Rotational Assembly
• 5 Year/100k Mile warranty *
• New Harmonic Balancer
• New OE Lifters, Lifter Guides and OE Crank Flange Bolts
• New Rod Bearings
• New Main  Bearings
• New Cam Bearings
• Billet Freeze Plugs
• New OEM Injector Cups
• Head Studs
• New Upgraded Valves
• New Hardened Seats
• New Valve Guides
• New Valve Seals
• Valve Train Components installed
• New Oil Rail Plugs (4)
• New Injectors
• New High Pressure Oil Pump
• New Turbo
• Front Cover
• New Low Pressure Oil Pump
• New Oil Cooler
• New Injector Wiring Harness
• Upgraded Up pipes
• Turbo Pedestal
• New Water Pump
• Thermostat
• New ICP Sensor
• New IPR Valve
• New Oil Filter

Build Features:

Full CNC blue print machining, (bore, deck, hone and line honed).

Blue print bored cylinder bores to a true 90 degrees from the crankshaft center line.

The Crankshaft is Polished and ground to .0005 concentricity or less.

Diamond hone within .0002 inch for precise piston to cylinder bore clearances.

Line honed the crankshaft bore housing to precisely align the crankshaft in the engine block.

The block is bored back to the crankshaft center line.

The piston diameter measured to the nearest .0001 inch matched to cylinder bores.

The Cylinder block on this 7.3L Powerstroke Short Block will be surfaced to a finish of RA30 or lower. This is mandatory for proper sealing of a MLS Gasket.

What does blueprinting an engine mean?

All our 7.3 Engines come with a Billet Blow-Proof Freeze Plugs

Piston Cracking is a real problem with tuned diesel trucks. Watch this video to see what we do to fix that!

Do you really need balancing though? Or is it just a lot of hype?

Interested in more options for your 7.3 like porting? We do that too!

• New HD Design Pistons
• New Pistons Rings
• New Pin Retainers
• Weight matched and Balanced Rotational Assembly (Is balancing really that important? Watch the video below and see!)
• Upgraded Exhaust and Intake Valves
• Billet Freeze Plugs

CHOATE Engineering Performance Crate Engine Features :

The Daily Driver is built for dependability. For consistency and fuel mileage. It is backed with a much longer warranty than anything else you will find on the market.

Upgrades over the Daily Driver include: (Please see the Workhorse Model for this next level Build.)

• O-Ringed Heads
• MLS Headgaskets
• Billet Flex Plate
• Coated, Fly Cut and Delipped Pistons
• Stage 2 Cam
• Chromoly Pushrods
• Welded Cam Gear
• Forged Connecting Rods

Common Issues With The Ford Powerstroke 7.3L Block and Heads (and how we fix them):

•  The 7.3L was plagued with inferior valve and seat material from the factory. The original design used parent material for the seats. Consequently, they were known to crack from heat cycles.
• The valves of the 7.3 are commonly known to wear down well below the margins. With razor sharp edges which can fail leaving the piston to take on the remainder of the valve in the cylinder.
• We only use brand new valves that exceed OEM standards, which do not have this issue.
• By use of our extensive cleaning methods thru media blasting, furnaces, spray cabinets, hot tanks, and ultra sonic equipment, we have protected your investment.
• 2001-2003 year model 7.3L’s came with Powdered Metal Rods. They were prone to failure around the 400 HP mark. These rods are only an issue at higher HP levels which is why we use forged rods for the Workhorse Model engines.

Optional Parts are not installed or covered by CHOATE. They are subject to the manufacturer’s warranty.