6.6L 2006-2007 Duramax LBZ Long Block Daily Driver Diesel Crate Engine

Equipment List:

6.6L Long Block Daily Driver LBZ Engine 2006-2007 – Duramax Diesel Engine

This build Includes:

• New Freeze Plugs
• 5 year/100k Mile Warranty
• New Flywheel
• New Harmonic Balancer
• Upper Oil Pan
• Lower Oil Pan
• Rear Cover
• Front Cover
• Front Main Seal
• Rear Main Seal
• Head Studs
• Remanufactured Heads
• New Guides
• New Valve Seals
• CNC Valve Machining
• Pressure Tested
• Surfaced to exceed Ra finish for MLS Gaskets
• Check both wrist pin and crank pin to rod clearances
• New Upgraded Pistons
• New Piston Rings
• New Piston Pin Retainers
• New OE Lifters
• Lifter Guides
• OE Crank Flange Bolts
• Crankshaft – Balanced and Matched Rotational Assembly
• Crankshaft is Polished and ground to .0005 concentricity or less
• Camshaft – Polished and Inspected
• New Rod Bearings
• New Main Bearings
• New Cam Bearings
• Install Pickup Tube O-ring
• Connecting Rods

Machining Processes

• Full CNC blue print machining, (bore, deck, hone and line honed) (See Video)
• The Cylinder bores are blue print bored to a true 90 degrees over the crankshaft center line
• Diamond honed to within .0002 inch for precise piston to cylinder bore clearance. (See Video)
• Bored and line hone the crank bore housing to precisely align the crankshaft in the engine block.
• Torque Plate Honed (See Video)
• The piston diameter measured to the nearest .0001 inch matched to cylinder bores.
• The Cylinder block is surfaced to a finish of RA30 or lower, which meets the factory specification in both flatness and smoothness for the block to head sealing surface. (This is mandatory for proper sealing of a MLS Gasket.)
• Keyed Crankshaft (See Video)
• Balanced and Weight Matched Rotational Assembly (See Video)
• Flexplate for Automatic transmission. (If you are using this for a manual transmission we highly suggest sending in your flywheel and pressure plate so we can achieve the best balancing job possible for your engine. Also, now is a great time to upgrade your clutch. Get with our team to talk about the options we have available for you!)

  What you need to know about Choate Vs. the Competition. We have put together a list of videos for all processes we do to this engine. It is your responsibility to educate yourself about the differences.

To do so we made that easier with this compilation of videos!

This is why we machine the crankshaft for an upgraded keyway!

This is why we square deck the block!

This is why we balance the rotational assembly!

This is why we torque plate hone!

Why we only use the Rottler hone for YOUR engine!

Why do we encourage you to buy a long block instead of a short block?

On the fence on which engine you should buy? Daily Driver VS WorkHorse Engine.

Assembled by Our Professional Team in house